Roofing Project — Newark, CA
Newark, California
Eastmont Hills · East Oakland · Crocker Highland · Montclair · Rockridge
Shingle, Tile, Metal & Flat Roof Systems in Oakland, CA
Every system has a right substrate, fastener pattern, and ventilation profile. We install shingle, tile, metal, and flat roof systems the way the manufacturer warranty actually requires.
Thanks. Your request is in.
We will text you to confirm.
Active leak? Our 24/7 emergency line is (415) 410-7917. Call now and we will prioritize your request.
Call (415) 410-7917- CSLB #1148511 C-39 licensed, opens the official CSLB license lookup in a new tab
- GAF + CertainTeed Certified · Veteran-owned: GAF Certified and CertainTeed ShingleMaster credentialed; see our manufacturer credentials
- 5.0 out of 5 4 Google reviews, opens Google in a new tab
- 5.0 out of 5 16 Yelp reviews, opens Yelp in a new tab
- 25-yr warranty On new roofs (plus up to 50-year GAF manufacturer coverage)
- Photo records Every job
How we handle shingle, tile, metal & flat roof systems in Oakland
Every roofing system has a right way to go on an Oakland roof and a dozen wrong ones. Composition shingle, concrete and clay tile, standing-seam metal, and TPO/EPDM flat assemblies each need a specific substrate, fastener pattern, and ventilation profile to actually earn the manufacturer warranty. We install the system you choose the way the spec — not the shortcut — requires, which is the difference between a roof that hits its rated life and one that fails early.
On Oakland roofs the conditions that matter most — Oakland Hills properties face serious wildfire risk and require Class A fire-rated roofing. Flatland areas near the bay experience salt air corrosion. Winter storms bring sudden heavy rainfall that tests drainage. — are what we plan the work around, not an afterthought.
- Composition shingle — the all-round Oakland value choice
- Concrete & clay tile for a 40–50 year horizon
- Standing-seam metal for fire zones and longevity
- TPO / EPDM for low-slope and flat sections
Shingle, Tile, Metal & Flat Roof Systems across Oakland neighborhoods
Eastmont Hills
Hillside homes above East Oakland, many from the middle of the last century, with composition roofs and views that come with wind exposure. Wind-lifted shingles, tired flashing at chimneys and worn-out valleys are the usual calls.
East Oakland
Stucco bungalows, duplexes and small apartment buildings, many with flat or low-slope roofs behind parapets. Ponding water and failed parapet flashing cause most of the leaks we trace here.
Rockridge & Temescal
Brown-shingle Craftsman and early-1900s houses on tight lots. Expect skip-sheathing under old roofs, dormers and crickets behind chimneys that need real flashing work.
Oakland homes we see on these jobs
- Craftsman and brown-shingle houses (roughly 1900–1930) in North Oakland, often with skip-sheathing that has to be decked over before a new roof goes on.
- Mid-century hill homes with low-pitch roofs that are unforgiving if underlayment and flashing are done cheaply.
Local conditions that shape the work
Hills fire zones
Much of the Oakland hills is mapped as a Very High Fire Hazard Severity Zone. Reroofs there need a Class A fire-rated assembly under Chapter 7A of the California Building Code, and we check your parcel before we write the spec.
Winter storms
Atmospheric-river storms dump a lot of water in a short time. Flat roofs with clogged scuppers and undersized drains are the first to leak.
Permits for shingle, tile, metal & flat roof systems in Oakland
Re-roofing in Oakland goes through the Planning & Building Department and its permit center. We apply for the permit, schedule the inspections and keep the job card on site. In the hills we confirm the fire-hazard zone first, because it decides which roof assemblies are allowed.
Permit office: City of Oakland Planning & Building Department (opens in a new tab). How we handle permits across the Bay Area: roofing permits explained.
Shingle, Tile, Metal & Flat Roof Systems in Oakland: FAQs
My house is in the Oakland hills. Does the new roof have to be Class A?
If your parcel is in a mapped Very High Fire Hazard Severity Zone, which covers much of the hills including Montclair, the reroof has to be a Class A fire-rated assembly. We look up the parcel before we write the estimate and spec the roof, vents and edge details to match.
How do I choose a roofer in Oakland?
Look the contractor up on the CSLB website, ask for proof of insurance and get the estimate in writing, itemized. In the hills, ask whether they checked the fire-hazard zone; for a flat roof or an apartment building, ask which membrane they plan to use and how they will handle drains and parapets. Make sure the permit is in the contract.
Which roofing systems do you install in Oakland?
All the major ones — composition/asphalt shingle, concrete and clay tile, standing-seam metal, and flat-roof membranes (TPO, EPDM). The right pick for your Oakland home depends on pitch, exposure, structure, and how long you plan to keep the house.
Is tile or asphalt better for an Oakland roof?
Asphalt is lighter, cheaper, and fine for most Oakland homes at 25–30 years on an architectural shingle. Tile lasts 40–50 but needs the structure to carry the weight. We'll tell you honestly which your home is built for.
Do you install fire-rated roof assemblies?
Yes. If your Oakland property sits in a Wildland-Urban Interface zone, the assembly has to be Class A fire-rated — that narrows the material choices, and we build to that standard where code requires it.
Other roofing services in Oakland
Roof Repair & Leak Detection
in Oakland, CA →
Roof Replacement
in Oakland, CA →
New Roof Installation
in Oakland, CA →
Emergency Roofing
in Oakland, CA →
Commercial & Residential Roofing
in Oakland, CA →
Gutters, Skylights & Roof Inspections
in Oakland, CA →
See our overview of roofing in Oakland, or learn more about shingle, tile, metal & flat roof systems across the Bay Area.